Retaining the rev counter for 8 and 6-cylinder Bentley engines.
| Identifier | ExFiles\Box 124\1\ scan0270 | |
| Date | 28th November 1939 | |
| 1044 To Jnr. {Charles L. Jenner} from Rm. {William Robotham - Chief Engineer} Rm. {William Robotham - Chief Engineer} 6/MH. {M. Huckerby} 28.11.39. Many thanks for your note on Tachometer Drive. I do not think that we can abandon the rev counter on the Bentley type of vehicle at present. In addition, one of the advantages of the 8-cylinder is that it will run up to 4,500 revs quite happily, and again, the 6-cylinder, as long as we retain the spring drive at the front end, will run to 4,500 satisfactorily. Therefore, I think we should scheme a rev drive for the 8 and 6-cylinder Cast Iron engines in the rationalised range. Thanks for the information about the aluminium engine. We will deal with this. Rm. {William Robotham - Chief Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).