Locating the drive for the revolution counter on the dynamo shaft.
| Identifier | WestWitteringFiles\R\October1927-December1927\ Scan083 | |
| Date | 11th November 1927 | |
| HS {Lord Ernest Hives - Chair} /RM. {William Robotham - Chief Engineer} FROM DA {Bernard Day - Chassis Design} /EV. {Ivan Evernden - coachwork} ORIGINAL DA {Bernard Day - Chassis Design} /EV {Ivan Evernden - coachwork} 3/M11.11.27. re. REV. COUNTER. X912 [crossed out] X8170 EAC. 14. We have mentioned this to E. {Mr Elliott - Chief Engineer} ,and he is bearing the matter in mind when dealing with the wheel-case of the engine. It would appear however that we shall have to content ourselves with a drive from the end of the dynamo shaft. We believe the camshaft end is hidden by the slipper flywheel. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).