Design change for the front anchorage of the rear springs on the Wraith model.
| Identifier | ExFiles\Box 9\5\ 05-page196 | |
| Date | 8th April 1938 | |
| To By. {R.W. Bailey - Chief Engineer} from Rm {William Robotham - Chief Engineer} /Les. c. Da. {Bernard Day - Chassis Design} 646 Rm {William Robotham - Chief Engineer} /Les.3/AP.8.4.38 FRONT ANCHORAGE OF REAR SPRINGS - WRAITH. As we find there is no benefit in reducing noise in the body due to fitting Silent-bloc bushes to the front end of the rear spring, we should like to have a design for a threaded pin at this position. The rear threaded shackles have been quite satisfactory on 26.G.Vl. {V. Lewis / Mr Valentine} in France so we suggest that the same bushes and pins are used for the front end. Rm {William Robotham - Chief Engineer} /Les. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).