Instructions for setting the throttle governor for EAC throttles using a specific device.
| Identifier | ExFiles\Box 66a\3\ scan0067 | |
| Date | 28th April 1925 | |
| To Mx. {John H Maddocks - Chief Proving Officer} from Hs {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} X8140 Hs {Lord Ernest Hives - Chair} /Rml/LG28.4.25. SETTING THROTTLE GOVERNOR. We are sending you a device for setting EAC. throttles. It should be fitted up as per attached sketch, a spirit level placed on surface marked level, and the throttle arm moved round until it is in contact with the roller. The biting-in bolt should then be tightened up. The small bolt holding the roller should not be riveted up until the throttle has been set. Hs {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).