Calculation table for the ampere-turns necessary to produce the required magnetic flux in various components.
| Identifier | ExFiles\Box 64\2\ scan0077 | |
| Date | 1st June 1927 guessed | |
| -6- AMPERE TURNS NECESSARY TO PRODUCE FLUX REQUIRED. | Part. | Matl. | Length. (") | Virtual section (sq.ins) | Total flux. | Flux density. Inch units. | Flux density. Cm. units. | H. {Arthur M. Hanbury - Head Complaints} | AT. per inch. | A.T. | |---|---|---|---|---|---|---|---|---|---| | Armature teeth. | Lamin. iron. | .460 | 5½ x .115 x 2.75. = 1.73. | 201000 | 116000 | 18000 | 200 | 400 | 184 | | Armature core. | " | .600 | 2 x .490 x 2.75 = 2.70. | 201000 | 74500 | 11540 | 7.5 | 15 | 9 | | Air gap. | Air. | .0125 | 1.80 x 2.750 = 4.95 | 201000 | 40600 | 6290 | 6290 | 12580 | 157 | | Pole core. | M.S. | .625 | .9x2.400 = 2.16. | 241000 | 111600 | 17300 | 130 | 260 | 162 | | Yoke. | M.S. | 1.700 | 2x.3125 x 4.000 = 2.50 | 241000 | 96500 | 14960 | 30 | 60 | 102 | | | | | | | | | Total :- | | 614 | EFC. {E. Fowler Clarke - Electrical Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).