The preference for 15-tooth axles over 14-tooth axles for the 29-LC chassis based on performance and body weight.
| Identifier | ExFiles\Box 66\4\ scan0326 | |
| Date | 14th October 1925 | |
| To Wor. {Arthur Wormald - General Works Manager} from Hs. {Lord Ernest Hives - Chair} c. to Mx. {John H Maddocks - Chief Proving Officer} [Handwritten] X8350 Hs {Lord Ernest Hives - Chair} 3/LG14.10.25. CHASSIS 29-LC. [Handwritten] X8350 (struck through) [Handwritten] X8770 Referring to Wor {Arthur Wormald - General Works Manager} 3/M13.10.25 attached. When the first experimental EAC. cars were being run, 14-tooth axles were tried. We consider that they caused the cars to be too fussy and there was increased noise, and wear and tear. The cars fitted with 14-tooth axles were tried by Sales and the following remarks were passed :- [Handwritten] X8770 (struck through) "CWB1/EP {G. Eric Platford - Chief Quality Engineer} 19.1.25 - The gear ratio of this car 14/52 bevels is considered unnecessarily low even with a body of this size and weight (saloon body - 52 cwts.) From previous experience the 15/52 gear is considered preferable." "BJ9/H2.2.25 - We prefer the 15-tooth axle although it is possible that some customers may eventually require a 14-tooth with very heavy bodies. We must of course demonstrate to customers with the same type of axle and chassis we shall supply to them." Hs. {Lord Ernest Hives - Chair} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).