Specification sheet detailing the interior and exterior fittings for a vehicle.
| Identifier | ExFiles\Box 7\5\ X 604 Body-page112 | |
| Date | 6th April 1937 guessed | |
| -4- Back Light. Toughened Triplex 3/16ths.in. thick. Rear blind hand-operated from the driving seat. Companions. Built-in recessed companions of approved design and having ashtrays. Interior Woodwork. Wood to choice. Solid type finishers to doors and quarter windows (not concealed fixings). Base of finishers to line up with screen capping and finisher on division. Visors and Mirror. Two concealed Beatonson roll visors and an interior mirror of plain mirrored glass, the latter to be submitted for approval. Interior Light. Central flush fitting interior light. Switches to be on the near side of the rear compartment and on the driver's side of the instrument board. Lamps in Companions. The switch for the latter to be in each compartment. Carpet - To choice. Scuttle Rail Light. Recessed lamp in scuttle rail to be operated by a push-pull switch on the instrument board. Scuttle Ventilator. Top scuttle ventilator opening forward with tray and screw operation. Anti-Noise Treatment. Full instructions to follow. - Special treatment will be applied to this car. Fog Lamp. Supplied and fitted by R.R.Ltd. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).