Request for three sets of parts for a semi-rigid mounting on an ignition distributor for experimental testing.
| Identifier | ExFiles\Box 61b\2\ scan0061 | |
| Date | 25th May 1927 | |
| X7690 TO-MR C. EFC. {E. Fowler Clarke - Electrical Engineer} BY {R.W. Bailey - Chief Engineer} /RD1/ML.25.5.27. IGNITION DISTRIBUTOR - SEC:8120. Will you please put in hand 3 sets of parts to the prints sent herewith, which represent a semi-rigid mounting of the fixed contact point in the ignition distributor D.70793 - D.71358 - L.T Terminal Clamp Support. D.71359 - Insert. D.71360 - Nut. D.71361 - Assembly of L.T. Clamp. D. {John DeLooze - Company Secretary} Sch: 259 Proposed Semi-Rigid Contact Support. The above parts replace the following standard parts on any standard distributor. D.51486 - DC - Clamp. K.1704.A - Screw. It is not suggested that this arrangement is suitable for a production job but only for experimental test. BY {R.W. Bailey - Chief Engineer} /RD. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).