Wraith II body clearances for the rear axle and propeller shaft, referencing drawing LeC.5324.
| Identifier | ExFiles\Box 7\5\ X 604 Body-page020 | |
| Date | 14th October 1936 | |
| To BY: Copy to Des. Hs {Lord Ernest Hives - Chair} /Hn. {F. C. Honeyman - Retail orders} x+o+y 604 GRY {Shadwell Grylls} E {Mr Elliott - Chief Engineer} /Ev. {Ivan Evernden - coachwork} 7/AN.14.10.36. Wraith II Body Clearances of Rear Axle and Propeller Shaft. We send herewith LeC.5324 showing the coachwork clearances round the propeller shaft and rear axle for Wraith II. This drawing shows the 25/30 H.P. axle centre box as already instructed and used with road springs which are flat under load. It also shows the inclined banjo Wraith II axle and the vertical banjo Wraith II axle, both of which are used with rear road springs having .8 negative camber under full load. This drawing has been made for coachwork purposes and no detailing is required. Ev. {Ivan Evernden - coachwork} Att:LeC.5324. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).