Specification revision for a Bentley Chassis detailing work on the rear springs and fittings.
| Identifier | ExFiles\Box 153\3\ scan0192 | |
| Date | 27th November 1942 | |
| JAH 1298 To Rm. {William Robotham - Chief Engineer} from Rm {William Robotham - Chief Engineer} /Wym {G. Harold Whyman - Experimental Manager} /CP. c. to Rm {William Robotham - Chief Engineer} /Wym. {G. Harold Whyman - Experimental Manager} Rm {William Robotham - Chief Engineer} /Wym {G. Harold Whyman - Experimental Manager} /CP.10/LH. {Mr Haworth} 27.11.42. Bentley Chassis 3-B-50. Bentley 60. Unit No.4. is revised as follows :- Specification of the above Chassis Work carried out at Clan 23.11.42. Rear Springs and Fittings. LOP.FB.4049. New "Spadite" interleaving fitted 2" x 1/16". New Spring centre bolts fitted to suit thicker interleaving. New Threaded Shackle Pin and bush fitted to near side shackle. Spring clips re-drilled for Split Pin Rm {William Robotham - Chief Engineer} /Wym {G. Harold Whyman - Experimental Manager} /CP. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).