Instructions for preparing a flexible flywheel for chassis unit W.III.8 25.G.VI.
| Identifier | ExFiles\Box 8\1\ 01-page65 | |
| Date | 11th October 1938 | |
| To HPS. {Horace Percy Smith - Experimental Factory Mgr} c. to Rm {William Robotham - Chief Engineer} /Wym. {G. Harold Whyman - Experimental Manager} 612. Rm {William Robotham - Chief Engineer} /NRC. {N. R. Chandler} 1/JH.11.10.38. Unit W.III.8 chassis 25.G.VI. Flywheel. Please prepare a flexible flywheel for the above unit - Rm. {William Robotham - Chief Engineer} 537 Disc. 1 off. Rm. {William Robotham - Chief Engineer} 534 Flywheel 1 off Rm. {William Robotham - Chief Engineer} 536 Inertia ring 1 off Rm. {William Robotham - Chief Engineer} 503 Cap, spigot bearing 1 off. Rm. {William Robotham - Chief Engineer} 538 Bolt 8 off. EX.30868 # 12 off. With regard to the flywheel Rm. {William Robotham - Chief Engineer} 534, this need only be drilled with the 8 holes for the 11" B. & B. clutch, the holes for the 11" B. & B. and 10" Long clutches being omitted. Rm {William Robotham - Chief Engineer} /NRC. {N. R. Chandler} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).