Replacement parts and quantities for a front shock damper.
| Identifier | ExFiles\Box 99\3\ scan0126 | |
| Date | 2nd March 1939 | |
| -3- By {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} 2/AW.2.3.39. K.9010. - S.Washer for Buffer. 2 off. K.4608. - S.Pin for Rocker Bolts. 2 off. K.4614. - S.Pin for Upper Bearing Yoke. 2 off. K.1807. - Rivet for replenishing Valve. 4 off. K.4214. - C.Nut for Upper Bearing - Yoke. 2 off. List No. 1751. - Perfect Oil Seal - Shaft Small End. 2 off. List No.17514. - Perfect Oil Seal - Shaft Large End. 2 off. Also attached are 2 Blue prints of the following, complied to suit:- LOP: EXS.1468. - Front Shock Damper. The above parts completely replace those given in LOP: FB.4728. Kindly instruct 2 sets. This scheme is as requested by memo Rm {William Robotham - Chief Engineer} /AFM. {Anthony F. Martindale} 6/MH. {M. Huckerby} 30.11.38. file 1260. ald {F. Allwood - Experimental Design} By {R.W. Bailey - Chief Engineer} /Ald. {F. Allwood - Experimental Design} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).