Drawing LeC. 2483, detailing modifications to the crankchamber, oil relief unit and gallery pipe.
| Identifier | WestWitteringFiles\R\October1927-December1927\ Scan080 | |
| Date | 9th November 1927 | |
| ORIGINAL FROM E. {Mr Elliott - Chief Engineer} C. to HS {Lord Ernest Hives - Chair} EAC.14. OIL RELIEF UNIT AND GALLERY PIPE. We send herewith drawing LeC. 2483. shewing the oil relief unit, gallery pipe, and connections to main bearings, also giving revised section of crankchamber. This crankchamber will have the water pump, ignition tower, and throttle governor, together with the carburetter, on the steering side of the engine, and the dynamo and magneto, together with the exhaust pipes, on the other side of the engine. The bottom half has been made with curved section walls with a view to eliminating drumming. We may also introduce a similar feature into the floor of the bottom half. The upper half does not require this treatment as the diaphragms are of much smaller area, and of thicker material, also they are supported and stiffened in a number of ways by ribs and bosses. We shall send revision drawings in due course shewing what modifications will be required to the designs already sent through for the wheelcase, cylinder blocks, cylinder head, etc. The moving parts, such as the crankshaft, con. rods and pistons, are unaffected. E. {Mr Elliott - Chief Engineer} Handwritten text: X8000 X8190 (struck through), X8205 | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).