Instructions for testing pivot lean, toe-in, and damper loads on a new axle.
| Identifier | ExFiles\Box 12\5\ 05-page108 | |
| Date | 1st May 1929 guessed | |
| contd :- -3- We should like you to go over the pivot lean from say 1° to 4°, trying every intermediate degree to establish the best setting. We ought also to try varying the toe-in on this new axle to see if we can improve joggles. SUSPENSION. We should like your recommendations of the loads on the dampers that give the best compromise : (1) For town and low speed touring up to 55 m.p.h. (2) For high speed touring. HS {Lord Ernest Hives - Chair} /Rm. {William Robotham - Chief Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).