Instructions to modify the Distributor earth connection on the 20 HP Chassis by replacing several parts.
| Identifier | ExFiles\Box 45\3\ Scan074 | |
| Date | 1st January 1925 | |
| X 4054 b To R.M.C. C. EFC. {E. Fowler Clarke - Electrical Engineer} BY {R.W. Bailey - Chief Engineer} /RD1/ML8. 1. 25. X.4054.B - DISTRIBUTOR - 20 H.P. CHASSIS. Referring to our recent instructions - BY {R.W. Bailey - Chief Engineer} /RD10/ML17.12.24, instructing an improved earth connection for the Condenser, we are now of the opinion that to have one cable permanently fastened and one fastened only with the spring clip arrangement is wrong and therefore, we propose to permanently fasten both these cables. Therefore, the following parts used on the standard Distributor are not required:- E.20647 - Spring. D.50560 - Stop Ring. D.51319 - Spring Stop. D.51320 - Terminal. D.51318 - Special Nut. D.51361 - Terminal Stud. These are replaced by - D.51369 - Terminal Stop. D.51370 - Special Nut. K. {Mr Kilner} 9005 - Lock Nut. K. {Mr Kilner} 4404 - Plain Washer. Will you please put this in hand. Prints herewith of:- D.51369/70. "D" Scheme 254. Cancelled BY {R.W. Bailey - Chief Engineer} /RD. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).