Modifications to the brake camshafts to improve stiffness and reduce weight.
| Identifier | ExFiles\Box 12\5\ 05-page036 | |
| Date | 5th May 1927 | |
| To BY. {R.W. Bailey - Chief Engineer} from DA. {Bernard Day - Chassis Design} c. to BJ. Hs. {Lord Ernest Hives - Chair} X7420 DA {Bernard Day - Chassis Design} 2/M3. 5. 27. EAC.7. FRONT BRAKES. X.7420 X.7090 X.7360 With reference to the question of reducing the sponginess of the rear brakes, we send herewith N.sch.2405., shewing the two camshafts stiffened up by increasing the dia. and drilling out. The effect is to make these shafts 50% stiffer than the Phantom, but on account of the increased leverage on EAC.7. the motion on the pedal is only slightly less than on Phantom, namely, approx. .094 instead of .1. The weight of the shaft however is appreciably less than Phantom. It will be seen that new pieces are called for, though of precisely similar design to those now in existance. DA. {Bernard Day - Chassis Design} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).