Listing prints for metal parts required for a Bentley propeller shaft centre bearing.
| Identifier | ExFiles\Box 87\3\ scan0099 | |
| Date | 3rd August 1939 | |
| 237. To: Rm. {William Robotham - Chief Engineer} BY {R.W. Bailey - Chief Engineer} /NS. {Norman Scott} 1/MG.3.8.39 BENTLEY PROPELLER SHAFT CENTRE BEARING Attached hereto are prints of metal parts required to make up the insulated centre bearing to G.CD.1481. Piece No. GB.5318 ... Distance Tube - Rubbers GB.5319 ... Foot - Support Bracket GB.5320 ... Plate - Rubbers GB.5321 ... Plate - Rubbers GB.5322 ... Bracket - Rubbers GB.5323/DC. ... Housing - Rubber GB.5324 ... Support Bracket Centre Bearing These prints are sent to enable you to put in hand the manufacture of these items. BY {R.W. Bailey - Chief Engineer} /NS {Norman Scott} Att. 7 prints as listed above. Handwritten notes: Signature over parts list: Rm {William Robotham - Chief Engineer} Signature under BY {R.W. Bailey - Chief Engineer} /NS {Norman Scott} : NS {Norman Scott} Note at bottom: Rm {William Robotham - Chief Engineer} We have now received D.O. instructions. WDG 8/8/39 | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).