Providing instructions for replacing a clutch and refitting associated bearings.
| Identifier | ExFiles\Box 101\1\ scan0196 | |
| Date | 16th April 1936 | |
| x500a To RHC. {R. H. Coverley - Production Engineer} Hs {Lord Ernest Hives - Chair} /Smth.4/KW.16.4.36. 22-G-V - Clutch. We want to continue running the original clutch in this car. Will you please replace clutch No.24 on C-17 by No.26 off C-16. Will you also refit the oilite cage pilot and trunnion thrust bearings if you are satisfied that they are still in good condition. The 1st motion shaft from C-16 will have to be used. Oil should be cut off from the trunnion thrust bearing, but not from the other lubricated surfaces of the trunnion. Hs {Lord Ernest Hives - Chair} /Smth. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).