Conversation with Borg & Beck about their Lockheed Hydraulic Brakes and single dry plate clutches.
| Identifier | ExFiles\Box 128\2\ scan0126 | |
| Date | 22th February 1932 | |
| GRY {Shadwell Grylls} Y2200. To E. {Mr Elliott - Chief Engineer} from ROY. {Mr H. Royce - Buyer} c. to Hs. {Lord Ernest Hives - Chair} ROY {Mr H. Royce - Buyer} 5/MG22.2.32 Borg & Beck Arising out of our recent conversation with the Borg & Beck Representative, you will recollect they are now making the Lockheed Hydraulic Brake, and the Borg & Beck single dry plate Clutch at Leamington - the English Company manufacturing under Licence from the American House. As far as the Clutch is concerned, they have sent us Assembly Drawings 40121/2 illustrating the single dry plate Clutch as used on the Humber "SNIPE" Chassis, which they are supplying at about 40/- each; also Specification Sheet. They will gladly submit further data, or come over again if we are interested. As far as the Lockheed Brake is concerned, they claim to supply: Morris 16 HP. Sunbeam Wolseley 15 HP. Lanchester (In this case it is a combination of the Lockheed and Servo (Vacuum. 2-tons Leyland Lorry Dennis 3 1/2 tons and many Midland Red Buses &c. In the case of the Clutch, in addition to Humber, they are supplying: Vauxhall Tilling-Stevens Dennis. &c. ROY. {Mr H. Royce - Buyer} ENCLOSURES. Print 40121/2 Specification Sheet. (1 of each to E and Hs. {Lord Ernest Hives - Chair} ) ENCLOSURE N°345 | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).