List detailing the design status for various car components, continued from a previous page.
| Identifier | ExFiles\Box 109\3\ scan0101 | |
| Date | 17th April 1941 | |
| -cont'd- - 2 - Ev {Ivan Evernden - coachwork} /JD. {J. Draper - Frames} 1/SW.17.4.41. (8) Sec.7000 Frame - jack lifting bracket Design Req'd. {John DeLooze - Company Secretary} Rear Engine Mounting, to suit Morris 8 Gearbox " " Rear Bumper & Mounting " " (9) Sec.7008 Front Bumper & Mounting Design In Hand (10) Sec.7041 Lubrication of Pendulum and Idler Lever Ball Joints " " " (11) Sec.7050 Steering Column & Box Steering Wheel with Hand throttle and dipswitch " " " Steering Column Mounting in scuttle Design Req'd. {John DeLooze - Company Secretary} (12) Sec.7080 Petrol Tank Filler Cap Design In Hand (13) Sec.7141 Position of Tecalemit Pump and Drive Design Req'd (14) Sec.7190 Instrument Board " " (15) Sec.8050 Horn Switch " " (16) Sec.8140 Ignition Coil on Dashboard " " The following can be mocked-up on the car without designs :- (17) Dashboard Insulation (18) Dashboard Wiring (19) Petrol Piping (20) Oil Pipes. (21) Wiring & Fittings The following are outstanding designs taken over by the coachwork section :- (22) Sec.5260 - Bonnet (23) Sec.7001 - Wingstays (24) Sec.7131 - Floor-boards. Ev {Ivan Evernden - coachwork} /JD. {J. Draper - Frames} Original to Rm {William Robotham - Chief Engineer} /HH. Prints to Rm. {William Robotham - Chief Engineer} Ev. {Ivan Evernden - coachwork} Ev {Ivan Evernden - coachwork} /JD. {J. Draper - Frames} Rm {William Robotham - Chief Engineer} /HH. Rm {William Robotham - Chief Engineer} /EAG. & Ashby. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).