Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Alterations and approvals for a chassis dynamo vibrator regulator and its components.

Identifier  ExFiles\Box 179b\1\  img117
Date  17th October 1932
  
FROM R.{Sir Henry Royce}
HS.{Lord Ernest Hives - Chair}
BT.{Capt. J. S. Burt - Engineer}
C.C. to SG.{Arthur F. Sidgreaves - MD} WOR.{Arthur Wormald - General Works Manager} DA.{Bernard Day - Chassis Design}
ORIGINAL
CHASSIS DYNAMO VIBRATOR REGULATOR
R1/A17.10.32 47
Y6092
Referring to E6/HP111032, D.{John DeLooze - Company Secretary} schs. 583. and 585., are approved.
The alteration to the switch seems slightly simpler.
The alteration to the distributing board is extensive. Perhaps its bulk looks greater on paper than the actual piece.
I agree with the advantages of sealing the cutout, and the interchangeability of the cover. I hope the latter will prove sufficiently watertight.
There does not seem to be anything unnecessary in the outline of the C.A.V. regulator, but as I have not seen this fitting it is difficult for me to say anything about it. Will you kindly send a specimen.
R.{Sir Henry Royce}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙