From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification sheet detailing various components and their design schemes for a vehicle.
| Identifier | ExFiles\Box 3\4\ 04-page154 | |
| Date | 30th November 1932 guessed | |
| Section: Steering Column & Box. Description: Peregrine Column and Box. Length to suit. 18" diameter steering wheel & controls. Steering support. Design: N.Sch.3544 N.Sch.3528 Section: Side Steering Tube. Description: Peregrine type. Derby layout. Design: N.Sch.3552 PB.95 Section: Petrol Tank. Description: Peregrine tank and filler to be used. Design: Section: Pedals. Description: Accelerator pedal. Clutch pedal. Design: N.Sch.3536 N.Sch.3537 Section: Dash Brackets & Footboards. Description: Footboards. Brackets. Dashboard. Pocket formed to clear cylinder block. Scuttle isolation. Design: N.Sch.3563 N.Sch.3535 N.Sch.3534 Section: Oil Pump on Dash. Description: Luvax pump bought out. Design: N.Sch.3486 Section: 1 Pipe & fittings. Description: Luvax "Olive" joint type. Design: Section: Rear Damper. Description: J.III type exactly as Peregrine. Design: Section: Front Damper. Description: HY.{Tom Haldenby - Plant Engineer} to prepare scheme of J.III type with axle control similar to Peregrine. Design: Section: Oil Tank. Description: An oil tank for the dry sump scheme will be located under the front apron. A filler, air vent and level device will be incorporated. Design: Section: Starter Motor. Description: J.III Starter motor used. Crankcase facing shown on. Design: Lec.3256 | ||