Register of issued engineering modifications and updates from 1930.
| Identifier | ExFiles\Box 29\2\ Scan263 | |
| Date | 1st September 1930 | |
| -2- BY {R.W. Bailey - Chief Engineer} /Mtn2/N.1.9.30. Date Issued, Stn.Sht. No., Title, Date completed, Series where brought in, chassis to test 11.6.30, X.6020, Alum.Ignition Tube with-out Ebonite Covering., 4.7.30, N.2., 27.10.30 20.6.30, X.7741, Accessory Dist.Board with two supplies., 4.7.30, N.2., 27.10.30 19.5.30, X.7350, .5 Higher Rear Axle Stand Pipe., 11.7.30, Production. 4.6.30, X.3579, Larger Valve for Autovacs, 5.7.30, Production. 6.6.30, X.7080, New Unions in Feed Pipe to Carb., 15.7.30, N.2., 27.10.30 2.6.30, X.7460, Two level reserve in Petrol Tank., 26.8.30, Production. 3.6.30, X.7250, Single Point Radiator Mounting., 26.8.30, N.2., 27.10.30 3.6.30, X.7980, Extra Cylinder Lubrication., 26.8.30, N.2., 27.10.30 12.6.30, X.7370, Servo Fabric secured by staples in place of rivets. Damper to stop servo clank., 26.8.30, N.2., 27.10.30 6.6.30, X.7190, Automatic oiling of clutch spigot bearing from Gear Box., 26.8.30, N.2., 27.10.30 22.5.30, X.7305, Fabric Couplings with plates rivetted on., 11.7.30, Production. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).