From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Mr. Royce's suggestions for modifying the petrol level indicator and spare fuel device.
| Identifier | ExFiles\Box 75\2\ scan0104 | |
| Date | 28th August 1920 | |
| X 3888 To Da.{Bernard Day - Chassis Design} from E.{Mr Elliott - Chief Engineer} Copy to CJ. " " Bn.{W.O. Bentley / Mr Barrington} " " Hs.{Lord Ernest Hives - Chair} " " EFC. X.3888. RE PETROL LEVEL INDICATOR AND SPARE " " By.{R.W. Bailey - Chief Engineer} FUEL DEVICE. Referring to N. scheme 540, it is feared that with the maximum body it will be difficult to undo the air and petrol pipes for the purpose of dropping the petrol tank, or to undo the screws which hold the top lid{A. J. Lidsey}, for the purpose of withdrawing the reserve fuel device. For this, and other reason,s Mr. Royce suggests inclining the stand pipe until its lower end passes through the centre of curvature of the top face of the tank, its upper end remaining approximately in the present position. This will make the upper flange symmetrical. The upper flange should be a brass pressure casting about ½" deep threaded inside, with a hand hole about 3.250" diameter. The ring which screws into this collar should have no collar feature on the top, and should be of "T" section, as shewn in sketch, the rim being decreased in thickness, and the screw holes being moved nearer to the outside. Contd, | ||