From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification sheet detailing components including the cooling system, fan, water pump, bonnet, and heater.
Identifier | ExFiles\Box 109\4\ scan0012 | |
Date | 27th October 1938 | |
-4- Rm{William Robotham - Chief Engineer}/Cr.{Mr Cra???ster / Mr Chichester}1/MH.{M. Huckerby}27.10.38. Cooling System - Cont'd.{John DeLooze - Company Secretary} Details and LOP's for above rad. have been issued. Fan. Dependent on engine. If Wraith engine fitted, standard Wraith fan, otherwise as instructed for B.60 engine. (B.III blades, hub and spindle assembly, with B.60 combined fan mounting and thermostat casing). Standard Wraith Ferogrip belt. Water Pump. If Wraith engine, as fitted to B.8.V. B.O.S. Engine as instructed for B.60 with up-to-date Skefco ball bearing, as handed to MPS/WSC.{W. S. Cassel} by RM{William Robotham - Chief Engineer}/Std. Water Connections. As standard Wraith but with special top connection as shown on ECD.946 and obtained by RM{William Robotham - Chief Engineer}/Std., together with bottom radiator connection consisting of EB.348 connection reversed. Bonnet. Similar to standard Wraith except where alterations to overall dimensions may be necessary. Undersheets. Similar to standard Wraith to be fitted on car to RM{William Robotham - Chief Engineer}/Std's verbal instructions. Starting Handle. To be instructed later. Car Heater. A.C. heater fitted in accordance with SCD.938. Engine. To be instructed by Rm{William Robotham - Chief Engineer}/Swdl.{Len H. Swindell} | ||