From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
New and existing parts required for a Shackle Bracket assembly.
| Identifier | ExFiles\Box 98\5\ scan0237 | |
| Date | 9th August 1940 | |
| 4100 or 1040 To Rm.{William Robotham - Chief Engineer} from Rm{William Robotham - Chief Engineer}/HH. C. for Ev.{Ivan Evernden - coachwork} The particulars given on this memo have not been issued. RIPPLETTS. PL.270 - Shackle Bracket. Sec.7000 - Frame and Fittings. In accordance with the above scheme, the following new details have been made:- RF.1487 - Support Tube - Shackle Bracket. 2 off. RF.1488 - Assembly of Shackle Bracket (R.H.) 1 " RF.1489 - " " " (L.H.) 1 " The following standard and existing parts will also be required:- FB.4903 - Shackle Bracket (R.H.) 1 off. FB.4904 - " " (L.H.) 1 " FB.4552 - End Support - Support Tube. 2 " F.75875 - Disc - Support Tube Ends. 4 " FB.4332 - Bush - Rear Spring Rear Eye. 2 " FB.4302 - Locating Screw. 2 " K.{Mr Kilner} 454 - Bolt - End Support. 4 " K.{Mr Kilner} 4316 - Nut - " " 4 " K.{Mr Kilner} 9010 - S. Washer" " 16 " K.{Mr Kilner} 4847 - Taper Pin - Shackle Brackets. 12 " K.{Mr Kilner} 4847 - " " - End Support. 2 " KB.1075 - Washer - Shackle Bracket. 2 " Rm{William Robotham - Chief Engineer}/HH. | ||