From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Car springing with increased deflection to improve riding qualities.
Identifier | ExFiles\Box 67a\2\ scan0265 | |
Date | 27th November 1930 | |
SG.{Arthur F. Sidgreaves - MD} FROM R.{Sir Henry Royce} X8410 R1/M27.11.30. C. to WOR.{Arthur Wormald - General Works Manager} HS.{Lord Ernest Hives - Chair} SPRINGING - re. CAR RUNNING X.7410. C. to BY.{R.W. Bailey - Chief Engineer} EP.{G. Eric Platford - Chief Quality Engineer} WITH INCREASED DEFLECTION. X.8410. X.7520. X.7350. We are all agreed that this is the only way we know of giving satisfactory riding qualities. You will undrestand that I have never fixed any standard of initial deflection but have suggested that it can only be settled by experience, which, for P. 1. and 2. seems to be 10" back, and 4.5" front. I agree to this, but it is not practical to have 5.5" at the front. If PN.{Mr Northey} is satisfied with the higher speed qualities, steering, and rolling, I think we shall have to struggle with the other difficulties of the greater sensitiveness in exact adjustment to the weight. Derby seem to have been for some time in favour of stiffer springs, probably due to, increased speed The rear dampers will be (I think) much improved by the shorter lever - 10" - and which demands a limit of 10" to the axle travel (by sling, as tested and found OK.) This should be pressed forward. R.{Sir Henry Royce} P.S. I telegraphed this morning as follows - "SG{Arthur F. Sidgreaves - MD} - Not necessary send car Quite prepared to "agree increased deflection to 10" and 4.5". "Satisfied Northey's judgment at high speeds. "Complete resume by post tonight". R.{Sir Henry Royce} | ||