Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
New drawing for a Push Rod for the Bentley 60 Chassis, replacing an older part.

Identifier  ExFiles\Box 123\5\  scan0082
Date  7th September 1938
  
To: HES
c/c D.P.
c/c Capt. Wadds
c. Rm{William Robotham - Chief Engineer}/Swdl.{Len H. Swindell}
1044
Swell Plee
BY/CS3/EH.7.9.38.
Re Bentley 60 Chassis (Cast Iron Engine).
Valves & Fittings - Sec:5060.
Please receive herewith blue prints of the following new drawing, detailed in accordance with memo' BY/NS.{Norman Scott}2/G.3.9.38.
EB.4199 Push Rod replaces (E.87350 (EB.3859/60.
Will you please instruct as required.
In accordance with the above memo' these parts are to be produced by the Belgrave Engineering Co.
BY/CS.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙