From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Specification of test for a 40/50 switchbox.
| Identifier | ExFiles\Box 61b\3\ scan0318 | |
| Date | 15th June 1931 | |
| SPECIFICATION OF TEST FOR 40/50 SWITCHBOX. Type - Two-rate charge. Full output with side and tail lamps on. Armature circuit broken before field circuit. ----------------- (1) Inspect the following points :- (a) The switch motion for correct operation as judged by the sensation of operating the switches. (b) Similarly, the operation of the gauge light press button. (c) The correct fit of the inspection lamp plug in its socket. (d) The locking mechanism for correct operation. (2) The insulation of the various switch contacts from the case of the switchbox shall now be tested by applying an alternating voltage of 200 through a low c.p. 200 volt lamp, between the case and each terminal in turn, with the exception of terminal O, both switches meanwhile being in their 'off' positions. Afterwards between the case and the magneto terminal mentioned with the right hand switch in each of the switching positions, i.e. M & B, M B & C, and M & C. In the last position repeat the test between terminal N and the case, (3) Now test the correctness of the switching operations as follows :- | ||