From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Proposed modifications to the exhaust system for the 'Stork' and 'Heron' models.
| Identifier | ExFiles\Box 182\M16\ img066 | |
| Date | 8th December 1922 | |
| TO BY.{R.W. Bailey - Chief Engineer} FROM DA.{Bernard Day - Chassis Design} c. to CJ. WOH. HS.{Lord Ernest Hives - Chair} ORIGINAL. DA{Bernard Day - Chassis Design}3/MB. 8.12.22. "STORK" & "HERON" EXHAUST SYSTEM. /3859 We send herewith N.sch.1358 shewing the silencer combined with the cutout which it is intended to useon the "Stork" and "Heron" and probably the "Seagull". This is based on the layout shewn on N.sch.1342, but in order to get a little more room for the pipe to pass the gearbox, and to clear the forward brake ropes, we have abandoned the idea of keeping the exhaust system perfectly straight in the plan view. The connecting pipe between the silencer and the trouser piece has a slight double bend in the plan view, and we should be glad if Derby would set this out in conjunction with N.sch.1352. We expect that some slight modification may be necessary for "Heron", as the brake carrier lever is not in exactly the same position, but as this is still under discussion we cannot say now. The fact that there is a single back brake rope has been taken advantage of to push the silencer further out, and now we should like to push it in again about .5" to give us a little more clearance for our cutout mechanism. We should also like the silencer brought forward 1.5" to give us more clearance for the brake mechanism. With reference to the springs operating the valve, the exact strength of these is a matter for experiment, for instance, it may be found unnecessary to have both the tension springs on the front valve, and the axial torsion springs on the rear valve. DA.{Bernard Day - Chassis Design} [STAMP: RECEIVED DEC 11 1922] | ||