Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Letter from Adamant Engineering Company regarding a manufacturing issue with a Marles-Weller Steering Gear drop arm.

Identifier  ExFiles\Box 28\2\  Scan085
Date  20th October 1932
  
X4094.
Telegrams: "ADAMANT, Phone, Luton."
CONTRACTORS TO H.M. ADMIRALTY, WAR OFFICE & AIR MINISTRY.
Telephone: LUTON 1818 (2 LINES).
ADAMANT ENGINEERING COMPANY, LIMITED
(Incorporating J.{Mr Johnson W.M.} C. THREADGOLD & SONS, Established 1878).
Engineers and Founders.
SPECIALISTS in the DESIGN and MANUFACTURE of HIGH PRECISION TOOLS, JIGS, FIXTURES, etc.
SPECIAL MACHINES, SPECIAL MACHINE TOOLS and ACCURATE PRODUCTION WORK.
SOLE MANUFACTURERS and SALES AGENTS for the MARLES and MARLES-WELLER STEERING GEARS.

Directors:
S. CARLTON SMITH, A.M.I.MECH.E., M.I.P.E.
Eng. LT.-COMMANDER F.{Mr Friese} G.{Mr Griffiths - Chief Accountant / Mr Gnapp} MATRAVERS, R.N., M.A. (CANTAB.), A.M.I.MECH.E., A.M.I.E.E., M.I.A.E., M.I.P.E.
O.{Mr Oldham} CARLTON SMITH, M.A. (CANTAB.), F.I.S.A., M.I.P.E., Secretary.
ALFRED SLATTER, M.I.E.E.
W. HAZEL, F.I.S.A.

Your Ref.
Our Ref. SCS/IFW.

Head Offices, Works and Design Dept.:
DALLOW ROAD, LUTON.

Messrs:
ROLLS-ROYCE LIMITED,
DERBY.

20th, October, 1932.

Dear Sirs,

With reference to the Marles-Weller Steering Gear which we have despatched to you to-day, we would draw your attention that the cone splining operation on the big end of the lever is not as it should be, as we had considerable difficulty with the broach and subsequent operation due to the fact that in the design of the head of your drop arm the metal is reduced towards the outer faces, leaving insufficient support for this operation to be carried out satisfactorily.

As, however, it would appear to be sufficiently good for preliminary purposes we are forwarding same with the Steering Gear, and have put in hand a new forging with larger faces so as to give the necessary support in machining.

The new Drop Arm will be completed as soon as possible and forwarded to you to change over.

Assuring you of our best attention at all times,

We are,
Yours faithfully,
for ADAMANT ENGINEERING COMPANY LIMITED.

S. Carlton Smith
Director.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙