Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Adoption of a synchro mesh gearbox and proposing a new design using epicyclic units.

Identifier  ExFiles\Box 13\7\  07-page102
Date  28th October 1931
  
COPY. X7310
HS.{Lord Ernest Hives - Chair}
DA{Bernard Day - Chassis Design}/HDY.{William Hardy} } FROM R.{Sir Henry Royce}

R1/M8.10.31. X523
Sent off 28.10.31. X5310
X7310

C. to Sg.{Arthur F. Sidgreaves - MD} WOR.{Arthur Wormald - General Works Manager} BY.{R.W. Bailey - Chief Engineer}
C. to MR. CLAREMONT. CHANGE GEARS.

We are up against a loss of RR. dignity in adopting the synchro mesh.

There is probably nothing so simple as far as it goes.

We may live down the copying of American cheap cars as ours may be better made or designed.

Per sonally I do not mind having to confess that I could not do or find anything better.

We have had for 2 yrs. a very good idea in applying the synchro mesh scheme to epicyclic gears, but I could not get a design that promised to be simple enough.

During the past weekend - Sat. Sun and Mon. - it has occurred to me that we could get all we needed from 2 epicyclic units - i.e. 1. 2. 3. 4. and reverse - but I find this difficult to handle, and it does not give ideal rations, but by adding one train we get the best and simplest epicyclic gear train that (after years of study by ourselves and others) I have seen - i.e. in my judgment. It is an accelerated train, and I think I can see through its most difficult point, which was the reverse speed. As it stands we get:

1st. .3 )
2nd. .5 )
3rd. .72 ) These ratios are ideal.
4th. 1.000)
Reverse .3 )

Synchro mesh exactly would be on 4th., and 1st, 2nd, and 3rd, are the same principle by the use of brakes equal to clutch brakes on each of the 3 annuli, after which they are locked while at rest.

An ordinary main clutch is used, and a side lever with the ordinary gate.

The behaviour should be the same as silent and synchro mesh on all speeds.

It should idle silently.

(1)
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙