From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
American modifications, their temporary nature, and specific comments on chassis updates and clutch spigot oiling.
Identifier | ExFiles\Box 81\2\ scan0191 | |
Date | 12th March 1924 | |
X.4616 To CJ. from R.{Sir Henry Royce} c. to BJ. HS.{Lord Ernest Hives - Chair} R3/M3.12.24. RE. AMERICAN MODIFICATIONS. We (RG.{Mr Rowledge} E.{Mr Elliott - Chief Engineer} DA.{Bernard Day - Chassis Design} and R.{Sir Henry Royce}) spent several hours on these last evening and have passed most things without comment as we really had not time to do more than examine the drawings generally. There does not however seem anything decidedly wrong which we should take exception to. It was understood that these modifications could only be recommended by me as a temporary expedient as we considered very much more work had to be done to the chassis to make it thoroughly up-to-date, considering the improvements which we have found during the past 10 years, (since the beginning of the war). However I consider that it is of little use writing at any length on the subject at the moment. On referring to our old work we continually find it rather difficult to depart much from the practice we instituted some 15 years ago, but the technical progress in heat engines, tyres, fuel, etc. and conditions of motoring, make it imperative that the chassis shall be modified in many ways. Regarding the item of clutch spigot oiling, I cannot see that the proposal of drilling through the length of the spigot can do any harm, and Hs.{Lord Ernest Hives - Chair} can test if it makes a reliable means of conveying oil to the clutch spigot bearing. We always disagreed with cancelling the valve scheme. We have always found it satisfactory if fitted with light worsted plug, unless something effective is proved which is simpler. R.{Sir Henry Royce} DESIGN BOND | ||