From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
List of specifications for various electrical components and discussion points regarding chassis supply and demonstration cars.
| Identifier | ExFiles\Box 30\1\ Scan187 | |
| Date | 31th May 1935 | |
| (10). E/Lid.{A. J. Lidsey}1/HP.31.5.35. Distribution Board. To be in accordance with present instructions, and with modifications as agreed between E.{Mr Elliott - Chief Engineer} and BY/RD. Body Lighting Junction Box. This is incorporated in the distribution board. Stop Lamp Switch. To be in accordance with present instructions. Regulator and Cutouts. -do- Petrol Pump. -do- Foot Switch. -do- Starter Switch. This is incorporated in the switchbox. Instrument Board. To be the latest type incorporating the large speedometer. Headlamps. To be standard P.100 with dippers and with a cancelling switch on the instrument board. Fog Lamp. A scheme is required for the mounting of this. ------ The following points were raised and discussed, and it was agreed that "E" should try and obtain a decision from Sales on the points in question during his visit to Conduit St on 28th inst. (1) If chassis are supplied to coachbuilders by the middle of August will there be sufficient time for the bodies to be built and finished off in time for Olympia. (2) With regard to the demonstration cars, it was thought that one of these should be a close coupled saloon similar to SpectreCodename for Phantom III 3. No.4. SpectreCodename for Phantom III will be a steel panelled close | ||