Enquiry for a cutout and a choking coil to operate with a high tension transformer for the Experimental Department.
| Identifier | ExFiles\Box 32\4\ Scan049 | |
| Date | 21th November 1922 | |
| To Hy. {Tom Haldenby - Plant Engineer} from EFC. {E. Fowler Clarke - Electrical Engineer} X1587 EFC {E. Fowler Clarke - Electrical Engineer} 3/T21.11.22. X.1581 - TRANSFORMER FOR EXPL. DEPT+ This is to confirm that you will enquire of Messrs. Cannings for a cutout suitable for use with the generator just received. Also we should be obliged if you would enquire from Messrs. Mitchells for a suitable choking coil to operate on the primary of the high tension transformer recently received, such primary being shunted by, say, a couple of lamps, with a view to providing a continuous variation of high tension voltage from a considerably low figure, to the maximum, or at any rate one which would give a continuous variation from say 5000 to 10000, 10,000 to 15,000, or 15000 to 20,000, utilising the various tappings of the secondary. EFC. {E. Fowler Clarke - Electrical Engineer} R.R. 199 (2501) (S1M576 19-7-17) M-18685 | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).