Status report on design items for the Phantom III chassis.
| Identifier | ExFiles\Box 30\4\ Scan018 | |
| Date | 30th September 1935 | |
| (2) ITEM. DESIGN POSITION. PHANTOM 3 CHASSIS. Hydraulic jacking system - front and rear. In hand. Revision of engine with divided construction. In hand. Duplex carburetter induction system with four port cylinder head. In hand. Gearbox:- lubrication scheme for 2nd and 3rd speed bushes and spigot bearing. In hand. Sheet asbestos lagged downtake pipes. In hand. General investigation of gearbox suspension with a view to decreasing gear noise. In hand. Cylinder head - four port - for use with two carburetter scheme or Duplex carburetter. Completed 30.9.35. Spherical bearings for front roll rod. In hand. Mod. to support plate for brake gear damper cylinder. In hand. Proposed oiling system using Autoklean filter. In hand. Gauze filter for hydraulic tappets. In hand. I.F.W.S. strengthened boss on upper triangle lever. Completed 27.9.35. " " " " main suspension lever. " 27.9.35. Mod. to steering column controls and horn switch. In hand. Revised layout of dashboard. In hand. | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).