From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Listing parts for the Bentley V front suspension mechanism.
| Identifier | ExFiles\Box 100\1\ scan0264 | |
| Date | 8th August 1939 | |
| 446 To MRG. c.c. RM.{William Robotham - Chief Engineer} c.c. EXP.DEPT. c.c. BY/A/S. BY/Ald.{F. Allwood - Experimental Design}2/AW.8.8.39. BENTLEY V.{VIENNA} FRONT SUSPENSION MECHANISM. - SECTION 7042. Please receive herewith two prints of the following:- SCD.1472. Modified Lower Triangle Bearing. - - - 2 off per set. EXS.1885. Outer Race - Lower Bearing. - - - 2 " " " EXS.1887. Triangle Lever - Lower RH.{R. Hollingworth} - - - 1 " " " EXS.1888. Triangle Lever - Lower LH.{Mr Haworth} - - - 1 " " " EXS.1889. Bolt - Lower Bearing. - - - - 2 " " " EXS.1890. Adjusting Washer - Lower Bearing. - - 2 " " " Alternatives. (EXS.1891. " " " " - - 2 " " " (EXS.1892. " " " " - - 2 " " " (EXS.1893. " " " " - - 2 " " " (EXS.1894. " " " " - - 2 " " " The following parts will also be required for use with the above:- KB.3583. Castle Nut - Lower Bearing. - - - 2 off. K.4603. S.Pin.- - - - - - - 2 " The above parts have been produced in accordance with instructions received under memo RM{William Robotham - Chief Engineer}/HFP.17/JH.4.7.39. Ald{F. Allwood - Experimental Design} BY/Ald.{F. Allwood - Experimental Design} | ||