Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Tappet mechanism design, including taper pins, tappet guides, and camshaft lubrication.

Identifier  ExFiles\Box 17\6\  Scan076
Date  2nd February 1929 guessed
  
contd :- -2-

There are a number of ways of doing this but we have shewn a taper pin sticking out on one side, to clear which a groove is provided in one side of the tappet guide.

The hole for this pin has to be reamed before hardening the tappet.

While on this question of tappet mechanism it might be mentioned that we looked into the question of running the camshaft and tappets completely immersed in a trough of oil as you requested and find it means raising the camshaft about .750".


E.{Mr Elliott - Chief Engineer}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙