From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Correction to the EAC.10 gearbox casting.
| Identifier | ExFiles\Box 15\5\ Scan040 | |
| Date | 6th February 1928 | |
| X. 7310 BY.{R.W. Bailey - Chief Engineer} from DA.{Bernard Day - Chassis Design} c. to BJ. Hs.{Lord Ernest Hives - Chair} DAL/M6.2.28. EAC.10 GEARBOX. We send herewith N.sch.2542 shewing a correction to the gearbox casting as a result of our examination of the box layouts which you have been sending us. Though on the original N.sch. the web carrying the servo bearing is shewn set, on your detail layout you have kept it straight, in so doing we think dangerously reducing the clearance between the 2nd. speed wheel and the web.. We think that the web should be set as on our original drawing, but not quite so much. When we were in Derby we saw some additional views being prepared of this casting, and we should be much obliged if you could send us prints of these. DA.{Bernard Day - Chassis Design} | ||