Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Issues with the fit of replacement slats for Bentley radiator shutters.

Identifier  ExFiles\Box 130\2\  scan0320
Date  2nd December 1936
  
1113

To By.{R.W. Bailey - Chief Engineer}
c. to Hs.{Lord Ernest Hives - Chair}
c. to RHC.{R. H. Coverley - Production Engineer}
c. to Rm{William Robotham - Chief Engineer}/Std.

Kingsbury.
2nd Dec. 1936.

Bentley Radiator Shutters.

A point that Kingsbury has brought to my attention is replacement of the slats in the shutters due to accidents. In very few cases the new slats received from the Works fit, and two great a gap and uneven line at the top is the result. This is due to individual fitting of slats to each radiator. To over come this could not the Depots have a small stock of lengths of slats, so that they could fit and shape them to the original radiator. This would save time and ease the situation at the Depots.

There is a case at the moment where it was necessary to change three slats owing to an accidents and those received from the Works for replacement are approx. 1/8" short, having been cut back more than is generally usual.

Rm{William Robotham - Chief Engineer}/G.W.Hancock.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙