Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Trial and fitment of a large S.U. carburetter for the Phantom II.

Identifier  ExFiles\Box 31\4\  Scan098
Date  5th October 1931
  
X1487.
RHC.{R. H. Coverley - Production Engineer} from Hs{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer}
Hs{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer}5/AD5.10.31.
X7090.

LARGE S.U. CARBURETTER FOR THE PHANTOM II.

We have received a print from the S.U. Co. of a carburetter they are making for us which is the right size for a single carburetter on the 40/50. We are anxious to try this carburetter on pipe E.81673 inverted and the attached sketch V.1226 shows a possible induction pipe for it. The difficulty is to get the carburetter under the bonnet and at the same time to have sufficient room between the bonnet and the air intake to get any sort of air silencer.

We should be obliged if you would make up a bend something on these lines for us and if necessary altering it to improve ease of manufacture.

Hs{Lord Ernest Hives - Chair}/Rm.{William Robotham - Chief Engineer}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙