From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Listing various parts and detailing the issue of their associated drawings and prints to suppliers.
| Identifier | ExFiles\Box 8\10\ 10-page152 | |
| Date | 23th October 1937 | |
| (2) BY/HSB2/WB.{Mr Brazier/Mr Bell} 23.10.37. FW. 281 Strip for Support Plate Bolts. 2 off FW.1345 Stiffening Plate - Main Lever Housing. 4 off. @ FW.1243 DC Distance Piece in Frame (Spring Anchorage) 2 off. G.52344 Stud for Distance Piece. 4 off. FW. 195 Cruciform Bottom Channel. 1 " FW. 256 Stiffening Plate in Side Member. 4 " FW. 540 Distance Piece. 1 " FW.1213 Cruciform Front Plate. 1 " FW.1214 " Rear " 1 " FW.1215 " RH.{R. Hollingworth} " 1 " FW.1216 " LH.{Mr Haworth} " 1 " FW.1217 " Top Channel. 1 " FW.1237 Stiffener in Side Member. RH.{R. Hollingworth} 2 " FW.1238 " " " " LH.{Mr Haworth} 2 " FW.1253 " - Rear Fleet Flanges. 2 " FW.1254 " - Feet Flanges. 4 " FW.1255 Vertical Stiffener - Front Feet. 2 off. FW.1256 Stiffener - Rear Feet - Top. 2 " FW.1257 " " " - Bottom. 2 " FW.1258 Top Horizontal Stiffener - Front End. 2 off. FW.1259 Bottom " " - " 2 " FW.1300 Washer for Rear Foot. 4 off. FW.1422 Assembly of Cruciform. 1 " FW. 368 Engine Support Bracket. RH.{R. Hollingworth} 1 " FW. 369 " " " LH.{Mr Haworth} 1 " FW. 370 " " Top Plate. RH.{R. Hollingworth} 1 " FW. 371 " " " " LH.{Mr Haworth} 1 " FW. 353 Frame Stiffener - Steering Box. 1 " FW.1225 Outer Bracket - Intermediate Levers. 2 off. FW.1226 Inner " " 2 " G.55934 Distance Piece. 2 off @ FW.1240 DC. " " 2 " @ FW.1241 DC. " " 2 " We attach to RHO/CAN's copy tracings of all the above parts with the exception of the parts marked @, which have already been issued with the LOP, and which are supplied by R.R.Ltd.to Rubery Owens, and also FW.1378/9, FW.1380/1/2, and FW.1422, which will be issued in a few days, when fully completed. We attach to Roy{Sir Henry Royce}/Ms' copy, 3 blue prints of each of the above for Rubery Owens, with the exception of FW.1378/9, FW.1380/1/2 and FW.1422. We shall issued prints of the latter to you for Rubery Owens in a few days' time, but we wish to make it clear that these unissued drawings do not stop Rubery Owens from proceeding with the parts issued above, as they are only required when all parts have been produced. The following standard parts will also be required :- - contd - | ||