Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Letter from S. Smith & Sons regarding a proposed modification to an automatic jet control unit.

Identifier  ExFiles\Box 31\5\  Scan012
Date  2nd February 1933
  
S.SMITH & SONS (Motor Accessories) Ltd
CRICKLEWOOD WORKS
LONDON, N.W.2

TELEPHONE: GLADSTONE 3333 (10 LINES)
TELEGRAMS: SPEEDOFAC, PHONE, LONDON.
CABLES: SPEEDOFAC, LONDON.
CODES: MARCONI, COMMERCIAL, BENTLEY'S.

BRANCHES AT
PARIS
MILAN
SYDNEY
WELLINGTON

AGENCIES AND SERVICE STATIONS THROUGHOUT THE BRITISH EMPIRE AND IN ALL THE PRINCIPAL COUNTRIES

SHOWROOMS & DEPOTS
179-185 Gt PORTLAND ST LONDON, W.1.
26-33, COX ST LIVERY ST BIRMINGHAM
144, DEANSGATE MANCHESTER
19, WEST REGENT ST GLASGOW
DUBLIN &
BELFAST

Handwritten Note (Top): E.{Mr Elliott - Chief Engineer} Will you please say if we can get this in? Dm{D. Munro}

Please quote our reference S.10

2nd February 1933.

Handwritten Note (Right): Will not go into existing covers. J.E.Swann

Messrs. Rolls-Royce Limited,
DERBY.

Dear Sirs,
'For the attention of Mr. Robotham.'
Re: Automatic Jet Control.

With reference to the above we understand from Mr. Skinner of the S.U. Company, that he is of the opinion that as two Carburetters are employed it would be advisable to use a more powerful type unit to control the two jets.

As you are aware, the model submitted to you has a 40m/m.{Mr Moon / Mr Moore} metallic bellows and in order to obtain the necessary extra power, we suggest our next size, namely 60m/m.{Mr Moon / Mr Moore} diameter bellows. We are, therefore, enclosing you blue print No.EX.X.7244 which gives the overall dimensions. If it is possible to accommodate this unit in the water jacket of the engine, we shall be very pleased to send you a model, either to your goodselves or to Messrs. The S.U. Company, for fitting.

We also enclose you our Blue Print No.EX.SK.7257 which shows the method of clamping the device in position.

Awaiting your reply and assuring you of our best attention at all times.

Yours faithfully,
p.p. S. SMITH & SONS (MOTOR ACCESSORIES) LIMITED.

[Signature]

THERMOSTATIC CONTROL DEPARTMENT.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙