From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Instruction detailing parts required for the Rear Bump Stop scheme.
| Identifier | ExFiles\Box 110\2\ scan0023 | |
| Date | 6th January 1941 | |
| 1030 727 To Rm.{William Robotham - Chief Engineer} from Rm{William Robotham - Chief Engineer}/HH. c. to Ev.{Ivan Evernden - coachwork} c. to EV{Ivan Evernden - coachwork}/JD.{J. Draper - Frames} Rm{William Robotham - Chief Engineer}/HH.4/SW.6.1.41. MYTH M.40. Rear Bump Stop - Sec.7000 to Pl.419. The following details have been made in accordance with the above scheme :- RF.2058 Rubber Buffer - rear bumpstop. 2 Off RF.2059 Base Plate " " 2 " RF.2060 Stiffener " " 2 " The following standard parts are also required:- K.344 .3125 dia. Bolt. 4 Off K.4313 .3125 " Nut. 4 " K.9009 .3125 " Spring Washer. 4 " The above parts will be added to the L.O.P. for Section 7000 in due course. This completes the instructions for the above scheme. ---------- Rm{William Robotham - Chief Engineer}/HH. [Signature] | ||