From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Requesting alterations to a drawing for Lockheed front brakes for vehicle 3.B.IV.
| Identifier | ExFiles\Box 82\5\ scan0214 | |
| Date | 3rd June 1938 | |
| 2006 also 206. To By/ALD.{F. Allwood - Experimental Design} Rm{William Robotham - Chief Engineer}/JBD.{John B. Dixon - Fuel Systems}14/JH.3.6.38. LOCKHEED FRONT BRAKES FOR 3.B.IV. to drg. SCD.148. Will you please make the following alterations (1) The adjusting cam is now shown in the reverse position and should be turned over. This is also shown wrong on Lockheeds drawing. (2) The adjustment assembly is shown fitted in a clearance hole in the carrier plate this should be located in a slotted hole as shown in dotted line on the Lockheed drawing. We require another set of Lockheed front brakes similar to those now fitted to B.56.BN{W.O. Bentley / Mr Barrington} but with the alterations called for above. These are to be fitted to 3.B.IV to enable us to fit up an arrangement using pedal operated hydraulic front brakes and servo operated Girlingon the rear. Will you please instruct the necessary parts. Rm{William Robotham - Chief Engineer}/JBD.{John B. Dixon - Fuel Systems} | ||