Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Recommendation to use bolted flange main silencer unions on future 40/50 HP designs instead of large screw nuts.

Identifier  ExFiles\Box 38\4\  Scan068
Date  12th May 1924
  
To E.{Mr Elliott - Chief Engineer} from Hs.{Lord Ernest Hives - Chair}
[Handwritten: 43436]
Hs{Lord Ernest Hives - Chair}10/LG 12. 5. 24.
40/50 HP.
RE. MAIN SILENCER UNIONS. [Handwritten: 4442 / 43436]
We recommend that we adopt the bolted flange instead of the large screw nuts on future designs.
There is always considerable difficulty in removing the nuts when the car has been running for some time. There is also the fact that a special spanner must be supplied.
The flanges we are using on 20 HP. have given no trouble.
Attached herewith is complaint we have received from Cricklewood.
With the flange joint it is also obvious when there is a leak but with the large union type of joint, this is not so.
Hs.{Lord Ernest Hives - Chair}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙