Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Design progress report listing the status of various components for the Spectre and Phantom II chassis.

Identifier  ExFiles\Box 30\4\  Scan158
Date  30th April 1934 guessed
  
- 4 -

ITEM. SPECTRECodename for Phantom III CHASSIS - CONTINUED:- DESIGN POSITION.

Rear axle tubes and driving shafts. Completed.
Modified position of cylinder dowels. Completed.
Ante surge flap valve in oil sump. Completed.
Rear engine mounting and tie link. Completed.
Spring pot and shock damper - Ind.F.W.Suspension. Completed.
Mods.to steering head and yoke. -do- Completed.
Centre mounted radiator and wings. In hand.
Front end of chassis - General Arrangement - General Motors scheme of Ind.F.W.Suspension. In hand.
Gearbox casing. 90% complete.
Helical 1st and reverse speed gears. In hand.
Dashboard and fittings. In hand.
Steering column support brackets. In hand.
Steering box and frame bracket. In hand.
Marles steering box as an alternative to the RR. steering box. In hand.

PHANTOM II CHASSIS.

Mounting of Klaxon windscreen wiper motor on dashboard. In hand.
Foot switch - Headlamp control. In hand.
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙