From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
The preparation of parts and modification of a flywheel to fit a 10' B & B clutch.
| Identifier | ExFiles\Box 129\4\ scan0197 | |
| Date | 13th April 1938 | |
| γ 1110 To HPS.{Horace Percy Smith - Experimental Factory Mgr} from Rm{William Robotham - Chief Engineer}/NRC.{N. R. Chandler} c. Rm{William Robotham - Chief Engineer}/Wym.{G. Harold Whyman - Experimental Manager} Rm{William Robotham - Chief Engineer}/NRC.{N. R. Chandler}5/MH.{M. Huckerby}13.4.38. SEMI-FLEXIBLE FLYWHEEL LOW INERTIA. Please prepare - Rm.{William Robotham - Chief Engineer}502 Inertia Ring A/C. 1 off. 2 copies of drawing herewith. Rm.{William Robotham - Chief Engineer}516 Washer S/M.{Mr Moon / Mr Moore} 8 off. Rm.{William Robotham - Chief Engineer}515 Bolt S/N. 6 off. Also Re-drill the existing flywheel Rm.{William Robotham - Chief Engineer}499 as shown on Rm.{William Robotham - Chief Engineer}514 so that it will take a 10" B & B clutch. This flywheel is at present on 29.G.VI, but please prepare the other parts before removing the flywheel from car. Rm{William Robotham - Chief Engineer}/NRC{N. R. Chandler}, | ||