Rolls-Royce Archives
         « Prev  Box Series  Next »        

From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).
Alternatives for dipping headlamp controls to avoid the use of coils.

Identifier  ExFiles\Box 26\5\  Scan129
Date  15th April 1928
  
BY.{R.W. Bailey - Chief Engineer} from DA.{Bernard Day - Chassis Design}
c. to BJ. Hs.{Lord Ernest Hives - Chair}

X3806

DA{Bernard Day - Chassis Design}2/M15.4.28.

CENTRALISED CHASSIS LUBRICATION. X.3806
DIPPING HEADLAMP CONTROLS. X.4555

We did not send you a sch. from here for applying the lubrication to the dipping controls, and when we saw the car last week we did not care very much for the arrangement with a coil. We have been trying as far as possible to XXX avoid the use of coils.

We accordingly send you herewith N.sch.2582 shewing two alternatives for dealing with this shaft, and suggest that the very simple one marked fig.1., which only requires one new special bush, and only one drip plug, could be applied to the next set of dipping lamps.

DA.{Bernard Day - Chassis Design}
  
  


Copyright Sustain 2025, All Rights Reserved.    whatever is rightly done, however humble, is noble
An unhandled error has occurred. Reload 🗙