New type of brush gear for the 20.HP model.
| Identifier | WestWitteringFiles\K\August1923\ Scan6 | |
| Date | 11th August 1923 | |
| TO EFC. {E. Fowler Clarke - Electrical Engineer} FROM E. {Mr Elliott - Chief Engineer} e. {Mr Elliott - Chief Engineer} to CJ. c. to BY. {R.W. Bailey - Chief Engineer} c. to HS. {Lord Ernest Hives - Chair} ORIGINAL E1/M11.8.23. X.4383 - NEW TYPE OF BRUSH GEAR - 20.HP. In reply to your EFC {E. Fowler Clarke - Electrical Engineer} 1/T23723., which I received after the holidays, would you kindly note that brush holder LeC.1734 should be used for the G.11. dynamo, carried on a suitable end plate of similar pattern to that designed for the EAC. dynamo. E. {Mr Elliott - Chief Engineer} | ||
From the Rolls-Royce experimental archive: a quarter of a million communications from Rolls-Royce, 1906 to 1960's. Documents from the Sir Henry Royce Memorial Foundation (SHRMF).